Wireless Mini PIR MP Infrared Sensor Motion Detector GSM Alarm MMS. Download User Manual. Wireless Mini PIR MP Infrared Sensor Motion Detector GSM Alarm M.

1. Set Up Pir Mp Alert

If you have the driver CD that you recieved with your printer, follow the below steps to install the saftware:. Turn on your computer. On your computer quit any open applications, including virus checkers. Insert the MultiPASS MP730/700 Setup CD-ROM into your CD drive. The MP Setup splash screen will appear automatically.

If MP Setup does not start automatically, on the Windows desktop, double-click My Computer (on Windows XP, click Start then click My Computer). Double-click the CD-ROM icon. If MP Setup does not start, double-click 'Setup.exe' (on Windows XP, 'Setup').

In the MP Setup splash screen, click 'Install MP Drivers'. Note: For Windows 2000 users, if Service Pack 1 or later is not installed, MP Setup will display a message and installation will be aborted. Follow the on-screen instructions, clicking the appropriate button to move from one screen to the next. MP Setup will install some system files and may prompt you to restart your computer.

If you are not prompted to restart, click 'Finish' in the MP Drivers Setup window and then proceed to step 7. If you are prompted, make sure radio button 'Yes, I want to restart my computer now.'

Is selected in the MP Drivers Setup window and then click 'Finish'. DO NOT remove the CD-ROM at this stage.

MP Setup splash screen will open after Windows has restarted. If you had to restart your computer and the MP Setup screen is not displayed or you closed it, on the Windows desktop, double-click My Computer (on Windows XP, click Start then click My Computer). Double-click the CD-ROM icon. If MP Setup does not start, double-click 'Setup.exe' (on Windows XP, 'Setup'). In the MP Setup splash screen, click 'Install MP Toolbox.' .

Follow the on-screen instructions, clicking the appropriate button to move from one screen to the next. At the MP Toolbox Setup dialog box, click 'Finish'. Confirm the MultiPASS is turned on.

Connect the USB cable to the MP730 and computer USB ports. Windows will detect the printer and proceed to install the driver files. Your MultiPASS includes additional software applications that you can install now or at a later date. To install the software, click 'Install Utility Software' and then proceed through each installation. You can also download the drivers by visiting the below link and selecting your operating system. Don't forget to vote if this helps.

Set Up Pir Mp Alert

Cheers:) Jul 17, 2009.

Main Features: Infrared sensor alarm. When people get close to the alarm, it will detect the signal and activate the alarm. Insert SIM card into the device for controlling. (GSM SIM card is recommended) Adopts advanced wireless communication technology. Audio monitoring, clear voice. After binding this device with your phone, it will call you when it alarms.

You can send message 'DW' to SIM card number, and if the alarm is moved, it can send you its new address to you. Remote control. You can turn on or turn off its sensing function by sending message to its SIM card number. Mini size and ultra lightweight. Simple operation, stable performance and easy installation. Low power consumption, long standby time and accurate alarming. Suitable for use in home, children's bedroom, office, hospital, car, storage, etc.

Function Introduction: A. When the body is near, it will automatically start the alarm. The highest sensitivity in the range of 4-5 meters. Put the alarm or paste in a certain height, away from the body within 5 meters within the angular range 120 degrees left and right, as long as people or animals, swaying back and forth in a very short time, induction start.

Connectivity can listen to a location within 15 meters of the situation, the sound is very clear. Using Methods: A. Turn on: Open the deck lid, insert the SIM card follow the instructions in figure deck automatically boot.(unsupport the sim of CDMA 2000) B. Number binded: After 15 seconds calling from mobile phone and other communication tools, it will connect automatically.

When you hear voice call, the bind succeeds, this operation is very simple. While human body moving back and forth passing the sensor, the product will call the binding number. Remote-control Seting: 1. Send '0000' to the SIM card number after a successful turn off this feature. Send '1111' is open induction. Parameters Sensitivity: 5-8m/ 16-26ft (center angle: 90 degrees) Standby current: less than 0.05mA Working current: less than 10mA For body sensing: 5-7 days Not for body sensing: 15-20days. General Model: A9 Special function: Infrared Sensor / GSM Alarm Main Panel Specifications Receiving Frequency: 850MHz / 900MHz / 1800MHz / 1900MHz Dimension and Weight Product weight: 0.021 kg Package weight: 0.18 kg Product size (L x W x H): 4.5 x 3 x 1.4 cm / 1.77 x 1.18 x 0.55 inches Package size (L x W x H): 14 x 11.5 x 4 cm / 5.50 x 4.52 x 1.57 inches Package Contents Package Contents: 1 x PIR MP.

Alert-A9, 1 x English User Manual, 1 x Power Adapter, 1 x USB Cable, 1 x Adhesive Get these Essentials for Your Product. Shipping There are two key factors which will affect the time you receive your items. 1 Item processing time After confirming your payment, we usually ship products out within 24 business hours. However, sometimes due to large transaction volumes or other order issues, we may require up to 3 working days to process orders. You will receive a notification email as soon as your product(s) have been dispatched.